Products profile

The SAC18000T is an all-ground crane produced by Sany Heavy Industry Co., Ltd. This crane has the following features:

• Coverage:

SAC18000T can cove r the installation of blower 140 meters and below, meeting the safety margin requirements of more than 20%.

• Efficiency:

When installing the blower, the crane can save 4.2 hours of time for each blower installed

• Capacity:

Depending on the height, the SAC18000T can lift loads of different weights. For example, the lifting weight is 190 tons at 100 meters, 172 tons at 110 meters, 160 tons at 120 meters, 150 tons at 130 meters, and 140 tons at 140 meters.

• Configuration:

The SAC18000T is equipped with a dual hoist configuration that can lift a rated load of 190 tons to an altitude of 100 meters. In addition, it also has the function of blower maintenance without sinking rope, wireless gradienter and heavy duty hook ±0.5°

• Safety Features:

The crane provides a full range of safety guards, including cylinder arm pin emergency drum, AI hoist identification and hoist emergency system

• Basic parameters:

The rated total lifting weight of the SAC18000T is 1800 tons, the boom length is 80.1 meters, the Outrigger longitudinal/transversal span is 13,468 * 13,647 mm, and the torque is 23,716 km. Engine model is OM926LA.E3A/1-00, WP15H660E61, engine rated power is 360 kW (Supperstructure) /485 kW (Crane Carrier)

• Speed:

The maximum travelling speed of the SAC18000T is 70 km/h, the minimum turning radius is 14.5 meters, the approach Angle is 17.7°, the departure Angle is 24°, the minimum ground clearance is 305 mm, the maximum gradeability is not provided.

This crane is Sany’s flagship product in the field of wind power installation and enjoys a reputation in the industry for its high efficiency and strong lifting capacity.

Scope of supply according to actual condition